Oncocare Infusion
Pump HP-60

Oncocare Infusion Pump HP-60


Dimension214(W) x 75(H) x 142(D)mm
Weight1.4kg (Including Battery)
Screen3.0 inch LCD touchscreen,
Brightness 10 levels adjustable
Standart AccessoriesPower Cord, Handle, Pole Clamp
Optional AccessoriesDrop Sensor, Nurse Caller, Barcode Scanner

Basic Parameters

Infusion modeRate Mode, Time Mode, Weight Mode, Sequence
Mode, Trapezia Mode, Micro Mode, LoadingDose
Mode, and Drip Mode
Infusion rate range0.1-2000.0 ml/h (20d/ml IV set)
0.1-667.0ml/h (60d/ml IV set)
Minimum increment of infusion rate0.10-99.99ml/h (min. increment: 0.01ml/ h)
100.0-999.9ml/h (min. increment: 0.1ml/h) 1000-
2000ml/h (min. increment: 1ml/h)
VTBI Range0.10~9999.99ml (min. increment: 0.01ml)
Total Volume Display0~9999.99ml (min. increment: 0.01ml)
AccuracyInfusion inaccuracy: ±5%
Infusion inaccuracy: ±3% (When the brand of infusion set is MC-SI)
Bolus & PurgeRate0.10-2000ml/h
3 Bolus Ways SelectableAutomatic/Manual/Semi-Auto bolus


Visual & Acoustic AlarmInfusion End, BAT Empty, Patient Side OCCL, Fluid Side OCCL, Infusion End KVO Start, KVO End, Relay Failed, Air Bubble In Line, No Drop, Too Many Drops, Too Few Drops, Standby End, No Drop Sensor, Infusion Near End, No Battery, No AC Power, BAT Low, Reminder Alarm, Pre OCCL

Power Supply

AC Power 100 -240 V, 50/60 Hz, power consumption 45 VA
External DC Power DC 12 V, 2.5 A
Internal Battery Lithium battery 10.8 V, 3000mAh
Battery Duration 10 hours @25ml/h with a new battery
Charging Time No longer than 4 hours (the pump is powered off during the charge)
WiFi / Wired To connect central infusion monitoring system, nurse caller
Barcode Scanning Patient information input by barcode scanner
Data Interface Supported, USB 2.0, USB 3.0, RJ45, Wi-Fi